The sand making machine is a new generation of energy-saving and high-efficiency crusher with international advanced level developed on the basis of our company’s years of research, development, and production of mining machinery and absorbing the advanced technology of similar products at home and abroad. The equipment plays an irreplaceable role. The sand making machine equipment can be widely used in the crushing and shaping of metal and non-metal ores, building materials, artificial sand making and various metallurgical slags. This machine is suitable for brittle materials with a Mohs hardness of less than 9 and is not suitable for viscous materials As well as stones with more soil.

Features of sand making machine:

1. Special willow riveting technology increases the strength and toughness of the machine body and effectively reduces machine resonance;

2. Hydraulic maintenance boom greatly reduces maintenance costs;

3. A variety of crushing methods to meet the crushing needs of different materials;

4. Imported bearings are used to ensure the stable operation of the machine;

5. The new impeller design optimizes the material flow direction, and the output is 30% higher than the old equipment under the same power;

6. With dual oil pump design, only one oil pump works during normal use. Only when the pressure and flow do not reach the set value, the second one will work, or when the first oil pump fails, the second one will automatically turn on. Ensure the normal operation of the host;

7. The bearing position is constant temperature. As long as the electric cabinet has electricity, the oil temperature should be above 15℃. When the oil temperature is higher than 50℃, the external water supply system (provided by the user) will work automatically until it drops below 50℃. If the temperature is higher than 70°C for 15 minutes, a shutdown signal must be sent to the host. Oil pump automatic circulation: After the main engine and oil pump stop, if the oil temperature is lower than 15℃, the heater will automatically heat up, and the oil pump will work automatically for 5 minutes to ensure that the temperature in the bearing barrel is close to the oil temperature in the oil tank to prevent freezing in winter.